We already know what to do with narrow-necked glass bottles like those used for beer or lager and plastic screw-on caps, but what about the metal bottlecaps?

Like so many little random things, these lids seem infinitely usable – I just can’t think of many ideas to use them up.

Any suggestions?

(Photo by trelin)

Like the post I did about joysticks, I’m not sure whether this one was actually a suggestion or another spam message.

I got an email from one Bradley Boericke with the subject “wetsuit” but without any explanation text (or text at all) in the message itself.

But whether it’s a genuine question or a really, really obscure way to sell me penis enlargement pills, it’s a good question: how can they be re-used or recycled?

I suspect, like swimsuits, they have a tendency to degrade at key pressure spots and in order to keep those key pressure spots covered up (since they’re usually the bits that people like to have covered up), you have to replace the whole suit even though the vast majority of it is still in a good condition.

So ideas? And also any suggestions for lengthening their lifespan?

(Photo by simmo333)

We’ve had an email from Sara R, asking:

What can I do with plastic forks? I always used to carry a proper one in my bag so I didn’t have to pick one up when I got a pasta pot for lunch but now the forks are inside the pot so I can’t refuse them. I’ve now got a stack of little forks that I don’t know what to do with. I reuse or recycle the pot itself but I don’t know about the forks.

Wikipedia informs me that plastic cutlery is usually Polystyrene – type 6 plastic – and that can’t usually be recycled easily so I guess we’re looking at reuses.

I guess they could be melted/moulded into jewellery or some of the other suggestions we had for metal cutlery but any plastic specific ideas?

(Photo by asolario)

We’ve had an email from Carla, saying:

I’ve recently developed an obsession with sardines and my green bin is now full of cans! Is there anything I can do with them?

We’ve already covered standard food cans but most of the ideas take advantage of those cans’ cylindrical nature and height.

The shallow nature of sardine cans might make them useful for under small plant pots (but watch out for rust) or for candles – both to catch drips of tall ones or a mould/dish for making new ones.

Any other suggestions?

(Photo by stroinski)

My beloved laptop died last week. It’s actually been dying for about a year but my patience/unwillingness to buy a new one combined with a few last ditch life-extending efforts by John meant it only shuffled off the.. electro-magnetic coil last week.

John bought it five years ago for work and (ab)used it for a couple of years, then I inherited it and have used it as my main PC ever since – and given I work on it all day, every day, it’s really quite impressive that it’s lasted this long.

But now we’ve decided to finally lay it to rest. The power supply (which has been replaced once before) and batteries are utterly shot, meaning it frequently lost power when I was in the middle of my work – and not just once but over and over again until the planets align and it decided it’d accept/store power again. The screen’s casing is physically damaged after an accident a few years ago and something either to do with that or the graphics card meant there were constantly glitches appearing and disappearing from the screen. The airport (wireless) hasn’t worked for years and last time we opened it up it seemed to have melted (??!) and the paint has worn off the edges of the keyboard bit, leaving electric-shock inflicting bare metal. I was happy to live with the latter things – using a wire instead of wireless, wearing a jumper to prevent the shocks – but the power thing became unworkable. There is only so many times something can turn on then off then on then off then on then off… before you want to throw it through a window.

We’re going to see if anyone in our local geeky world can use it for its non-broken parts but if it’s not any use to them, I don’t know what else to do with it. Our usual computer recycling place refurbishes old PCs but I suspect, given this is an Apple and so uses all sorts of proprietary Apple connectors and whatnot, it’ll be too much hassle/expense to fix it.

Any suggestions though?

(Photo by John from when it was shiny and (quite) new, and we didn’t have piles of crap on our shelves)

(Also apologies for the couple of hours downtime that we had yesterday – our server was being moved or something.)