Bettina has asked:

How can I reuse cookie cutters? Other than as soap molds.

First things first, it has to be said: do consider passing them on if they’re still in usable condition so other people don’t have to buy new. Charity/thrift/op shops will probably take them to sell on, as would many schools/community groups for use during bulk cooking sessions for special events.

Now some onto reusing/upcycling ideas: just yesterday I saw someone using little cookie cutters that they’d got in Christmas crackers (& the like) for cutting out salt dough buttons and cute pedants/jewellery – I guess that’s not really that different to the original biscuit cutting idea but is a crafty rather than culinary angle.

Decent size metal cookie cutters can be used to shape fried eggs – stop them from stretching out right across the pan. We’ve got a round one that’s standard English muffin size so we can have round, deep fried egg muffins for breakfast – yum! (Warning: they do get hot while frying! They cool down quite quickly once off the heat but take care if you try this!).

Moving away from the kitchen, some people hang or mount them for decorative purposes – obviously ones more interesting than just round or just square work best for that (for example, snowman or star shaped ones for Christmas decorations, or hearts for Valentine’s or even all year around ones in romantic households ;) ) – but those simple round/square shapes could be used as little box frames for tiny pieces of artwork/special items. If you want to upcycle them to match your decor or if they’re discoloured, you could paint them with paint suitable for metals (enamel paint?)

Or you/kids could use them as stamps for painting.

Any other ideas for ways to reuse them?

(Photo by schleicher)

Broken umbrellas were done a few years back, but most of the suggestions were reuses for the umbrella fabric.

How about specifically the metal frame, as is or taken apart? Any clever ideas, anyone?

Over on the old umbrella page, Pamela mentioned a lovely idea:

I saw broken umbrella frames used by a theatre troupe, they knotted streamers to the frame, and they blew in the wind, they held it like a rain umbrella, but it was fanciful and lovely and attracted attention. This was a walking troupe, on the street, attracting people to their performance.

While most of us probably wouldn’t want to become street performers with our old umbrellas, I wonder if a frame with streamers placed in the garden would act like a portable scarecrow…?

Nude umbrella frames remind me of swifts, for balling yarn from skeins – but I suspect they might have too many sharp bits/catches for nice yarn. Anyone used/modified one for that?

Any other reusing or recycling ideas? What about ideas that use it in parts rather than whole?

(Photo by LilGoldWmn)

Anyone got any suggestions, please, on uses for an old wrought iron 3ft square garden gate which has reached the end of its gate life but must have some usefulness left?

Since UKVegGardeners is a community of, well, UK veg gardeners, the suggestions have mostly been about ways to use it in the growing of veg ;) People have suggested using it at the back of a trough for climbers or if you have two of them, making an A-frame for peas. (Someone else suggested a homemade BBQ grill for cooking “jumbo sausages” :) ) I think they’re great suggestions – but wondered if anyone else over here had other ideas to add.

I’ve seen iron gates that are no longer gate-able but still reasonably sound used to patch up fences in a shabby chic way – the spaces let small animals/wildlife nip through but not bigger things.

If it’s pretty wrought iron, I wonder if it could be used to make garden furniture… Depending on how heavy it is, it might be wall mountable and could be used as a hanging rack for tools, watering cans and whatnot.

Any other ideas?

We are a hairdressing scissors company trying to find a charity we can send old hairdressing scissors too?

If you know of any could you please let me know.

I don’t know of any – does anyone else?

What about charities that collect scrap metal in general? From what I’ve read, hairdressers scissors tend to be make from steel and that’s widely recyclable – does anyone know of any charities that collect steel to raise money from recycling?

I would like to use steel and aluminium cans to make jewelery. Do you know how to cut the metal out? Should the can be crushed first? Do you know how to smooth the edges so they don’t cut? If you could throw any light on this or point me to a website as I am not getting much coming up in google at the moment? Thanks.

I’ve made numerous things out of drinks cans (all aluminium I think) over the years and have mostly just used scissors for the cutting – it’s not as hard to cut as you’d think. I might use a can opener to remove the lid or a knife to start a hole in the body but then scissors suffice. I typically cut down the print “seam” and around the top & bottom to remove the curve so am left with a flat rectangle of metal.

(I’ve tried using shaped hole punches on cans but only lightweight ones so not had much success. Alison Bailey Smith has talked about the heavy duty ones she uses on plastic – I wonder if they’d be good on metal.)

And if the edges are smooth, not jagged, they’re also not as sharp as you might think. I’m not saying I’d necessarily want to wear them as jewellery in their nude state but in all my making, I’ve not once cut myself. Anyone got any tips for making the edges safer though?

Finally, anyone made any interesting jewellery from cans – or seen any inspiring examples of work around the wonderful worldwide web?

The grill is rusty pretty much all over and there is a rust hole in the base too. My husband wants to throw it out and get another but I’d like to try fixing it first. Please give me some hope that the effort with a wire scrubber will be worth it!

A lot of barbecues at the cheaper end of the market have chrome-plated steel grills and once the chrome gets scratched or otherwise damaged, the exposed steel rusts really quickly. You might get all the rust off now but I’m not sure you’ll be able to keep it off in the future – anyone know any heat/food friendly way to protect it again? If it’s a cast iron grill – most expensive but not uncommon – then you should be able to de-rust it and protect it again like any cast iron pan/appliance.

As for the base, it depends on the size/location of the hole – a small one low down could be turned into a fat trap. Assuming it’s a kettle/barrel type bbq, you could strip it right back to metal (possibly worth doing all over in one go) and repaint it with a heat-proof metal paint (like stove paint) to reduce further rusting. However as someone who has spent far too long stripping metal recently, let me warn you, it’s not exactly a fun pastime.

If you don’t think it’s worth the effort to save this one, learn from this one’s untimely demise when you buy/care for your next one — look for one with a better grill or if it’s already a good one, protect it better in the first place, and don’t leave bbqs outside and uncovered in wet/moist weather.

Any further advice/suggestions?

We’ve had an email from Alicia:

Because a leak caused damp, all the metal stuff in my kitchen cupboard went rusty while I was on holiday. Didn’t think that could happen but it has! There is a square grater, a colander and a seive. Can I do anything with them?

I’ve de-rusted a cast iron griddle pan and we regularly have to de-rust our less-than-perfectly-seasoned wok but I imagine it might be harder work to restore holey things like that – anyone got any advice on repairing them and protecting them so they don’t continue to rust?

I’ve seen all three used as fun light fittings (eg this Instructable uses a colander as a ceiling light shade). If you don’t want them rusty, you could sand them back to get rid of the flakiness and paint them to protect it from future rust and give it a new look.

Failing all that, they’re some sort of metal so can be recycled in the metal scrap bin at your local tip/waste collection site.

Any other suggestions?

I need to know how to recycle the inner brass parts of grandfather clock that no longer work?

Brass, like nearly all metals, is in high demand in the recycling world and so if there is a good weight of it, most local scrap metal dealers would willingly take it off your hands – some might even pay a little for it. We have random-but-frequent scrap collections around here (some more legitimate than others…) and there are usually metal bins at local tips.

I’d imagine the workings would also be highly desirable to other people who want to reuse rather than recycle them – someone might be able to make them work in another clock or, probably more likely, use them to make artwork. Offer them on your local Freecycle/Freegle group – or put them on eBay if you think they might be worth a few quid (if they’re heavy, you could say pick-up only if you didn’t want to organise shipping).

Any other suggestions? Any particular practical or creative ideas for things that could be done with them?

how can i recycle an old jerry can in a creative way ?

Lieze doesn’t say whether it’s an old school pressed steel one or a newfangled plastic one – or whether it’s been used as a fuel container or a water one.

My first thought for anything container shaped at the moment is “plant pot” (has anyone else had a scarily successful germination rate for their seedlings this year?!) but I think I’d be hesitant to use an old fuel canister for that, even if I could work out a way to make the opening bigger. Anyway, that’s not particularly creative so … I don’t know – maybe if you can slice off the front off a metal one, you could attach hinges and make it into a fun storage cabinet. (I love the idea of it being painted bright pink for the juxtaposition with the cold, industrial metal ;) )

Any other suggestions?

(Photo courtesy of Wikipedia)

I’ve got a large amount of chicken wire leftover after conducting some work in my garden. The biggest 1ft by 2ft, the rest smaller. Can I recycle them in my can bin?

While it certainly could be recycled as scrap metal, it might cause problems further down the can recycling line if you add it to your recycling bin, particularly if your recycling is sorted by machinery. If that bin is your only way of getting it into the recycling system, it might be worth contacting the recycling people at your local council and seeing what they advise (every council is different). Other than that, roaming scrap metal collectors are becoming more common again and most tips/household waste and recycling centres have scrap metal bins.

What about reuses? If you’ve got room to store it, it could be used for patching holes in the future and I know many sculptors use it to make wire frames for their work too. Other suggestions?

(Photo by Elné Burgers

Darling beloved girlfriend of mine, have you featured old shopping trolleys on your terrifically awesome site Recycle This? Because there are currently three we’ll have to get rid of – the one half-buried in grass in the woodland next to our house and the two further down the stream in the woods proper (where all the rubbish collects at the bottom of a big hill and which we’re going to tidy up this summer). Your wonderful readers must be able to come up with some ideas for them and now, I’m going to make you a giant milkshake because I think you’re so great.

(I paraphrase slightly.)

Since they’re metal ones, they could just be scrapped but you know me, I’m much more about reuse than recycle.

By my guess, all the trolleys have been in their current place of residence for at least a couple of years so it’ll be both a pain to get them back to their original homes. I think they still technically belong to them, so if it’s obvious where they’re from, we might call to see if they’ll deal with it – but they’re not in a condition to be reused there – they’d probably just send them for scrap.

Any ideas?

(CCSA photo by de:benutzer:aeggy)

At my mum and dad’s house the other day, I spotted half an old wooden ladder had been reused as a cat ramp – the cats are getting old and they can’t jump up to the kitchen window sill any more so use the ladder to get up there and through the window (which they use instead of a cat flap). I’ve also heard about ladders being used as the basis of ramps for chicken coops.

Inside the house, old ladders can be used as fun bookshelfs – step-ladders with deeper rungs have more shelf space but rickety old wooden ones look more fun.

What else can be done with old ladders?

How can I recycle old badges? plastic and metal.

Actually recycling them may be difficult as they tend to be mixed materials – metal and potentially multiple types of plastic but they’re perfect for passing on to someone else. A lot of people collect badges – doesn’t matter what’s on them or actually, the more obscure the better – so either offer them to a local charity/op shop or if you’ve got enough of them to make it worthwhile, offer them on your local Freecycle/Freegle or even eBay/Etsy/Folksy.

A question for badge makers – can old badges be recovered using badge making machine?

Any other ideas?

(Photo by Miss Frannington)

There is a section of old drainpipe in the woods next to our house too – I haven’t investigated it too closely yet but I think it’s an old metal one, so not as easily hackable but still potentially useful.

Any suggestions?

The liner is a double skinned metal tube that is dropped down the chimney and attached at the bottom to the stove’s fluepipe. It’s also blooming expensive – and the fitters left the end-of-roll offcuts with us. We’ve got one piece about a metre/yard long and about 18cm/7″ in diameter, and a second slightly smaller piece (in both length and diameter).

What can I do with those leftover bits?

My first thought was the old reusing favourite – plant pots in the garden. We’ve got some old chimney tops already (left by the previous owners, currently home to my garlic) so it could be a bit of a theme. But that seems to be a bit of a waste of their potential – another thought I had was to save one of them to use when we finally get around to making a rocket stove.

Any other suggestions?

(Pic to follow when my camera is charged and I’ve put some shoes on ;) – still rather disorganised after being ill I’m afraid…)

We’ve had an email from Lesley and Julia, explaining:

We have a pair of scissors at work. There’s nothing wrong with the blades, but the rubbishy plastic handle has broken off. Any ideas?

I remember a pair of all metal scissors breaking at the hinge when I was in my teens, and I kept the blades to use instead of a craft knife — but the individual blades were nowhere near sharp enough or thin enough to do that well.

So any other suggestions?

It may have been sparked by the turning of the seasons but there seem to be a lot of people in my life buying new boilers at the moment – my mum & dad’s 28 year old one is getting cranky and is going to be replaced by a much more efficient one; my best friend Katherine’s is slightly newer but even less reliable, which isn’t ideal given she’s got a 22 day old baby at home (hi again baby Joe!); and our boiler at the old house won’t make it through another winter and will have to be replaced by either us or the next people in there. (Both my mum & dad and Katherine have immersion heaters/tanks, we had a combi.)

They’ve got a high scrap value at the moment because they’re usually made from a whole lot of metal but are there any good reuses for them rather than just sending them for recycling?

Anyone turned them into giant barbecues or woodburners/stoves? I’ve seen metal barrels and gas canisters used for those things… I guess the immersion heater type tanks could be used for water butts in the garden, maybe?

Any other cool reuses?

Anyway, while I was doing the old keys one the other day, I saw that the British charity, Guide Dogs for the Blind collect old house keys as a fundraiser – and they collect old coins too.

Like old stamps, certain ones are obviously highly collectable but there must be a lot that aren’t quite so popular – all those bogstandard 5pences and 10pences that were replaced in the 1990s for example.

Any creative or practical suggestions of things that can be done with them? Any other charities that collect them?

I also used to know about half a dozen charities who collect leftover change from overseas excursions but can’t think of any of them right now – anyone know of any?

What can I do with old sewing pins? After years of faithful service, they’re all really blunt or really bent or both (since one leads to the other). I know they’re tiny but what can I do with them?

Most pins I’ve come across are made from steel so could probably be recycled with your normal metal recycling. It’s such a tiny amount of metal though, it hardly seems worth the bother but it’s still better than them sitting in a landfill dump somewhere.

As for reuses, blunt dressmakers pins with plastic heads could be chopped down (with wirecutters) and used instead of push pins on a notice board. I also imagine they could be used in costume jewellery making – any specific ideas?

Any other uses?

(Photo by drniels)

Hopefully they’re recycled as part of a commercial doorstep recycling programme but most of time it seems like they’re going to landfill – here they were next to a skip filled with other random rubbish. Very frustrating.

If we took some of them, what could we do with them? I know after intensive cleaning, crude oil barrels can be made into woodburners/rocket stoves and barbecues – could these essentially big tin cans be used for a similar thing on a smaller scale or is the metal not heavy duty enough?

With the top taken off (and the edge made safe), I imagine they could be turned into planters for the garden – albeit ones that might rust over time.

Any other suggestions?

And it’s not just conferences, the last two we got were quietly slipped into our food bag when we were picking up some late night chips – grrr.

We don’t open that many bottles – and a corkscrew or can opener is always closer to hand than a single-use tool – so the little advertisements are just about useless for their intended purpose.

The one in the photo is quite basic so if nothing else, could be thrown in the metal recycling but we’ve got some unnecessarily complex plastic-and-metal ones so not as easily recyclable.

Are they good for anything else other than opening bottles?

But what can I do with them?

I got into the habit of keeping them after attending a great recycling workshop last year – Alison Bailey Smith, who ran the class, uses them as part of her wonderful wire work.

I like the idea of some tin work with them – perhaps making little tiny boxes like Atomic Shrimp – but any other suggestions? Any practical ideas for how the little sheets of metal?

I’ve got some of those fold-up chairs for camping but the metal tubing on one of the legs has snapped. I’m going to keep the seat fabric as a spare but what can I do with the rest of the tubing?

I’m sure a scrap metal dealer would take it in a flash – we have them patrolling our street every few minutes, I’d just have to think about taking it into the garden and they’d appear to take it off me – but obviously reuses are more fun :)

As straight lengths, they’d be great for supporting growing stems in the garden and cut into shorter lengths, you could make a wind-chime thing out of them (I wonder if they’re a wide enough diameter for the wind to whistle through them as well as clanging them together).

Depending how flexible they are/how strong you are, you could also bend them into a spiral to use it as a trivet under pans/hot dishes.

Any other ideas?

I have lots of tea light candles…metal container as I use a lot of them.

I love those little candles but I hate the waste they produce…so I’d love to get some help with reusing them =)

The ones I’ve seen tend to be thick aluminium foil so they could probably be recycled along with your other aluminium products – we can doorstep recycle them here.

But I hear you Bob: reusing rocks!

I’ve seen them used countless times as miniature ashtrays – but ones that are thrown away after use, so that’s not exactly much better than throwing them away in the first place.

So any suggestions?

(Photo by kix)

i was wondering if you knew what i could do with the foil top of milk bottles?

I remember a Blue Peter fundraising appeal from circa 1985 that involved us collecting them for charity but now charities – like Southampton’s Gift of Sight appeal – seem to collect plastic ones instead.

Since they’re just foil, they can be recycled along with other foil products – we can include it in our doorstep recycling.

But what about reuses?

(Photo by LHMike)

Hi all! I’ve got a collection of watches which no longer work. They were all cheapy plastic fashion ones (I know, I know, naughty me! I’m much better about that sort of thing now!) so it’s not like they’ll have much value second hand. Will charity shops want them or will they just throw them away?

I guess it depends how they’re broken – if they just need a new battery, they’re probably be more willing than if it’s a broken and not-easily-replaceable strap or cracked face. Anyone work in a charity shop and able to advise further?

Aside from passing it on through a charity shop or Freecycle or whatever, how about stripping it for parts and making some steampunk-style jewellery?

Any other suggestions?

(Photo of a really quite nice watch by vierdrie)

Alison started off by showing us her favourite knotting technique but I kept forgetting how to do it mid-knot so ended up knitting a section of copper-coloured wire instead. While I slogged away at that, Alison showed us a number of other techniques including making coils from scrap plastic/foil (from sweet bags, carriers or anything really) wrapped in wire, twisting strands of wire together evenly using a hand drill and working with coaxial cable, sheathing and other scrap metals (Alison frequently uses tomato puree tubes – which are gold coloured on the inside – and the silver insides of toothpaste tubes for backing pieces).

The session was well attended – with about 10 of us around the main table – and we all brought our own ideas and other craft techniques to the party so learnt as much from each other as from Alison. With my knitted base, I played with a number of ideas for the focal piece of my bag but in the end, decided to use two small toy dinosaurs I’d brought along (Jeff and Zach) and a deadly meteorite made out of more of the copper-coloured wire and the lime green handles of a M&S carrier bag.

Given the time frame of the class, most people focused on making smaller things – jewellery or items with broach pin backs so they could be used as decorations on clothes or on bags (Alison was wearing one of her broaches as a necklace pendant; the one below was made by someone in the workshop). In hindsight I guess I should have done this too because I spent a long time knitting when I can do that at home ;) Still, it was a great workshop and while I perhaps didn’t do as many varied elements as some people, I feel I’ve got the knowledge to go it alone now – and certainly will go for it ;)

Thanks so much to Alison for running the workshop and providing all the materials. Thanks are also due to Red Dot Exhibitions for organising it and all the other (free!) workshops this week – I just wish I’d been able to get over for more of them…

(More photos to follow when I get myself organised ;) )

Chez has just emailed to offer some further dishwasher recycling suggestions:

We recently bought a new dishwasher and the old one (which has served us well for 23 years) has been taken by the local scrap metal merchant, but before it was taken, I rescued the interior fittings.

The “drawers” are on rollers and have made excellent storage in the bottom of the wardrobe.

There were 3 removable plate racks which I am using for plate storage in my kitchen cupboards.

The removable cutlery basket is now by the computer with an assortment of pens, rulers etc in it.

Any other suggestions for the various fittings?

What can I do with old flat baking trays? They’re a bit rusty so we can’t use them for food anymore. Can they go in my green bin?

I’m not sure about the green bin because everywhere has different rules and it also depends what they’re made out of but the guys that collect scrap metal around here would probably take them.

As for reuses, the rust might come off with one of those metal scrubber things but it’ll obviously rust right up again if it gets wet a lot again – perhaps clean it up and paint it with some rust-preventing paint. If it’s got a lip all the way around the edge, it could then be used as tray under plants or for kids to use during messy craft session (the lip might help stop things spilling/spreading all over the place).

Any other suggestions? What about suggestions for trays that are completely flat or with just one raised edge?

(Photo (and craving for gingerbread caused) by Jenny Rollo)

how can I reuse a broken step ladder? the rungs are alright, it’s the support bit at the top that hold it in the upside down v shape that is broken. i could just give it away for scrap metal but i wondered if there was anything i could do with it instead.

I’m presuming it can’t be fixed or at least not fixed well enough to be trust-worthy (an important quality when you’re 8ft off the ground) – might be worth Freecycling it in case someone is a step ladder fixing expert though.

Aside from that, could the rungs be used as a shelving unit maybe?

Any other suggestions?

(Photo by hortongrou)