My wife just bought a new toaster oven. The previous one had problems in her eyes, because the spring-loaded door didn’t work as smoothly as when new, and the unit, after three years, had a couple unsightliness issues.

The door is not much of a problem, as far as I’m concerned. It does stay shut reliably when you shut it. So, okay, now I’ve got this little heating unit that I can take to my shop. It seems the controls function as-new. Thermostat system works. Heats up to 450* F.

People are using old toaster ovens for flow soldering, for un-soldering components on circuit boards, and for powder-coating of small objects. Right now, I don’t do any of those things… but you never know

Got any other ideas as to how it can come in handy?

Toaster ovens aren’t very common in the UK but they seem to be mini table-top electric ovens – the bread is put on a horizontal tray for toasting but they can be used for other things too (much like any electric oven).

First things first, since it works well, do consider passing it on to someone is less concerned about the door/aesthetic issues — if your local thrift/op/charity shop doesn’t accept electronics, you could pass it onto someone else directly through your local Freecycle/Freegle group.

If that ship has sailed though and it’s needed to be removed from culinary service, it may still be ripe for random crafting reuse. It doesn’t go hot enough for things like clay pottering firing or enamelling (the latter of which is a shame because perhaps he could have fixed Su’s casserole pan… ;) ) but would be fine for the things Joel suggests or other low temperature crafts such as Fimo or the recycled equivalent of Shrinky Dinks (there seems to be a new trend for making pedants from plastic number 6 – (not expanded) polystyrene – cups).

Some gardeners recommend always starting seeds off in a sterile potting mix/seed compost which can be bought or made at home – Alys Fowler recommends a couple of minutes in the microwave or popping it in the oven for an hour at 80C/175F – the toaster oven would work for that.

Any other suggestions for Joel – how he could pass it on or reuse/recycle it for other purposes?

(Photo from Wikipedia)

We have 4-year-old electric oven in good working order which we would like to donate to a Charity. Any ideas?

We’ll actually in a similar position soon – our (15+ year old) oven works for general cooking but not for the precise/high temperatures we need from it for baking etc, so we’ll be getting a new one in the new year.

It might be hard to find a charity that would accept an oven – due to both its size and for safety reasons. Our plan was to offer it on Freecycle/Freegle, or via our local Gumtree (we’ve had more success with the latter) – passing it directly on to someone who could use it rather than going through a charity.

If you definitely want to pass it through a charity though, my only suggestion would be checking with any local charities that provide furniture or household items for people moving on from homelessness or other precarious situations. I don’t know if they’d take it but Emmaus train formerly homeless people to test & refurbish household items before selling them on, so they might be in a position to take, test and pass it/sell it on.

Does anyone else have any other suggestions for how it can be passed on?

(Photo by MrDeeds

While I was ill, we had a bit of a frugal-living tragedy in the home: the ceramic bowl from the slow cooker (aka crock pot) was dropped and smashed into two pieces. Noooooo!

We bought it cheaply a few years ago now – I wanted to see if I’d use it enough to warrant investing in a better quality item – and it’s cheap manufacture is probably why it broke so easily now. It’ll also be nigh-on impossible to get a replacement part because it was a cheap shop own-brand item rather than a set model from a well-known manufacturer.

(I do use it so will replace it in some way or another – but not with another cheapy. I will also get a bigger capacity one – I originally bought the slow cooker for making stews etc but it wasn’t big enough for batch cooking. I mostly have used it for making stock. Any recommendations will be gratefully received.)

So anyway, I’ve essentially got a broken heavy ceramic pot (which will probably be broken up further into crocks for big outdoor planters), a metal-rimmed glass lid (which will probably be used as a generic pan lid) and the heater-housing, a bowl-shaped (but not sealed) electrical device that heats things slowly and cheaply over a long time. The heating bit won’t be anywhere near as efficient now – the thick bowl helped maintain the temperature and the lid fits the bowl, not the housing – but my first thought was using it with a different bowl to heat things for craft pursuits – like wax for candlemaking or oil for soap making.

Even on “low”, it’ll be a bit too warm to use as a bread dough incubator and while it might be useful to keep milk at a steady temperature for cheese-making, it just isn’t big enough to be worthwhile.

If I do want to actually get rid of it, I should recycle the heating unit according to WEEE regulations – for me, that means taking it to the electronic goods pile at our local tip, although some councils do doorstep collections. I’d probably offer it on Freecycle or similar first in case anyone is in the opposite situation – a pot & lid with a broken heater.

Any other reuse suggestions though?

(Stock photo by Kowloonese but mine is similar, just not a proper Crockpot. And with a broken dish ;) )

I’ve had two straighteners/flat irons (to straighten hair) die on me. Is there a way to recycle these other than tossing them?

As a minimum, they should be collected for electronic/electric waste recycling – either at your local tip/”household waste recycling centre” or through an in-store take-back scheme (they take your old item when you buy something new from them) – all shops which sell small electrical goods (including phone shops & department stores) should in theory have a WEEE recycling scheme. Things taken for WEEE recycling are stripped down and their metals reclaimed, so it is worth doing.

But are there any reuses for them? As anyone who knows me/has seen a photo of me will know, my frizzy head is not exactly familiar with hair straighteners so I’m not sure I know enough about how they work to be able to suggest other reuses. Anyone got any ideas?

We’ve got two old electric kettles in our garage, one works but is very grimy, the other doesn’t work, not sure why. Can we do anything with them?

Electric kettles are covered under the WEEE Directive so in theory, you should be able to send them back to their manufacturer for recycling. In practise though, this isn’t always easy to do – but most, if not all, councils in the UK have some provision for small appliance recycling at household waste centres. Some even do periodic doorstep collection of electrical items so do check on your local situation.

It might be worth seeing if the dirty working one can be rescued though – it might just need some elbow grease and a good de-scaling. If you don’t have a use for it, someone on your local Freecycle/Freegle group might be able to use it either for general kettle use (if they’re happy with how it cleans up) or for non-food purposes.

Fun/pretty old kettles – or vintage-style new ones – might also have some appeal as a quirky planter.

Any other reuses or better ways to recycle them?

Work as getting rid of a coffee machine it got free from a nescafe rep, and i thought of instead of letting it go to the bin i would rescue it and give it a home. I got it home and realised that it requires these expensive disposable coffee pods to work (the reason work got rid) so I am asking if any of the bloggers/readers of this page own one of these machines and if they have discovered methods of refilling these with filter coffee. Or if no one can help me with this nice ideas on how to reuse them, they are unfortunately made of many materials and hard to recycle. i don’t want to be tied to the evil nescafe brand so any hints or tips would be immense.

I don’t think I can put into words how much those machines annoy me – all the excessive packaging just to force you to keep buying their product. Seriously grrrr! Grrrrr! The one my last place of work had was even worse than the pod things (which seem to be aluminium) – it was a plastic bag thing with a plastic nozzle for attaching to the machine: two minutes of convenience versus an eternity in landfill, smashing, just smashing.

Anyway, there seem to be some reuse hacks out there for the pods but some people complain that the coffee isn’t quite as good and/or it might break the machine. If the machine is going to get ditched anyway, I suspect it’s worth a shot.

Any other suggestions?

I have quite a collection of recharger plugs for stolen or broken mobile phones, cordless drills, etc. These never seem to fit the newer versions. What should I do with them?

I believe in the UK they’re covered by the WEEE Directive and nearly all household waste sites have specific points for electronic equipment to ensure they’re disposed of safely.

That’s just disposal though and it would be better to reuse them if possible. If you still know the maker/model of the original piece of equipment, you might want to try putting them on eBay – or selling them at a car boot sale or giving them away on Freecycle – to see if someone else could use them. Some charities that collect old mobile phones might also welcome old chargers – they usually say whether or not they want them on their websites.

(There is a move to make a universal mobile phone charger – nearly all the major manufacturers have agreed to use it – so hopefully that’ll cut down this problem slightly in the future.)

Any other suggestions for reuses or ways to recycle them?

I have a grill I no longer need, but it’s a bit grotty so I don’t think I could sell it on. It looks like this –>

Are there any facilities for recycling items like this? It seems a waste to bin it, but it’s difficult to clean so we couldn’t get it into a resaleable state.

In the UK, it will be covered by the WEEE Directive so the place you bought it from might take it back – or if nothing else, there should be an electricals spot at your local “household waste sorting site” (ie, the local tip), where they’ll get disposed of properly.

If it still works though, it would be a shame to scrap it just because it’s a bit grotty. If you don’t think you can sell it, try giving it away on Freecycle instead – someone might be grateful for it in whatever state it is in – particularly if they have a non-food use for it. The only non-food use that springs to mind instantly is for making shrinky-dinks but I bet someone with some electrical knowledge could use the heating element/timer for something fancy and useful.

Any other ideas?

Hey. I’ve got a broken Guitar Hero guitar. Don’t know what to do with it and saw your page about game controllers so thought you might be able to help.

Depending on how/why it’s broken, you might be able to send it back to the vendor: if it’s their fault, they should replace it. If however, it’s broken because you got a little too into the Rock moment and smashed it on the floor… they’ll probably be less like to replace it ;)

Again depending on how it’s broken, it might worth eBaying it for “spares or repairs” – I know the head and neck separate on the newer guitars, I wonder if if the broken part could be swapped out… If it’s broken for an electronic switch issue, someone that way inclined might be able to fix it in a shot.

Aside from that, a toy for a kid?

Other ideas?

(Photo courtesy of Wikipedia)

I bought myself an iPod AT LAST. It’s a violet Nano, and I need some decos for it, like a cute sock or a charm.

What can I recycle into some nice iPod stuff?

Playing with Nancy’s necklace idea recently, I made myself a cute charm out by stacking tiny circles of plastic on a piece of thin wire – the circles punched out with a regular hole punch so they were both tiny and even. A few pretty buttons on a length of pretty thread would work in the same way.

As for the sock, you could quickly and easily sew a little pocket using fabric any item of old clothing – I like it when upcycled things include features of the original clothing, like buttons or belt loops from the original item.

I’d also be tempted to crochet, knit or weave some unusual material just to see what happens – the pocket is so small it wouldn’t take long to try out a few different things. Narrow strips of old carrier bags? The shiny insides of crisp packets? The wire from old knackered headphones?

Any other ideas?

Involving less crafts, I’ve also seen them used as planters in allotments (since the holes let excess water drain away) and an outside toy bin in a garden – so they’re obviously versatile little chaps but has anyone else got any other suggestions?

(Image courtesy of Nathalie and Esprit Cabane)

(Oh, and we got a mention on Zaproot yesterday – a cool eco-show. If you’re already here, you already know about us of course but still, it’s nice to be mentioned.)

John bought it five years ago for work and (ab)used it for a couple of years, then I inherited it and have used it as my main PC ever since – and given I work on it all day, every day, it’s really quite impressive that it’s lasted this long.

But now we’ve decided to finally lay it to rest. The power supply (which has been replaced once before) and batteries are utterly shot, meaning it frequently lost power when I was in the middle of my work – and not just once but over and over again until the planets align and it decided it’d accept/store power again. The screen’s casing is physically damaged after an accident a few years ago and something either to do with that or the graphics card meant there were constantly glitches appearing and disappearing from the screen. The airport (wireless) hasn’t worked for years and last time we opened it up it seemed to have melted (??!) and the paint has worn off the edges of the keyboard bit, leaving electric-shock inflicting bare metal. I was happy to live with the latter things – using a wire instead of wireless, wearing a jumper to prevent the shocks – but the power thing became unworkable. There is only so many times something can turn on then off then on then off then on then off… before you want to throw it through a window.

We’re going to see if anyone in our local geeky world can use it for its non-broken parts but if it’s not any use to them, I don’t know what else to do with it. Our usual computer recycling place refurbishes old PCs but I suspect, given this is an Apple and so uses all sorts of proprietary Apple connectors and whatnot, it’ll be too much hassle/expense to fix it.

Any suggestions though?

(Photo by John from when it was shiny and (quite) new, and we didn’t have piles of crap on our shelves)

(Also apologies for the couple of hours downtime that we had yesterday – our server was being moved or something.)

My parents turned there old dishwashers into compost bins. Dad cut the back out and the hinged door becomes the lid. Sure, it’s a bit ugly but in the garden you hardly notice it – you could paint it – but either way, it’s better than becoming landfill.

It certainly is. And most dishwashers I’ve met have had quite insulated shells so would keep the heat trapped inside and keep things composting along nicely.

Any other suggestions about things to do with broken old ones?

I just put my Christmas tree up this week and was disappointed to find that three strands of lights aren’t working. I hate to throw them in out, but what can I do with them?

It’s early in the festive season but I suspect a number of people will be hitting the same snag around about now. I’ve seen Christmas tree lights used in all sorts of non-festive places – but they’ve all been working.

Given the amount of little bulbs and wire involved, it’s probably one of those things that is, unfortunately, cheaper to replace than to fix these days – but has anyone got any trouble-shooting tips to get them working again?

But if that doesn’t fix the problem, what other options are there to reuse them either in all or in parts?

(Photo by singhajay)

Some charities/companies that take old mobiles accept the chargers too since they’ll re-sell working phones to the developing world (for example in the UK, Help the Aged) but this isn’t the case with every phone recycling scheme. It might be worth checking with the ones that do take chargers if they take chargers by themselves.

Another idea might be to offer it on your local Freecycle group in case anyone in your area needs a replacement or wants a spare.

Any other ideas?

(Photo by canoncan)

So I took them in and sorted them by colour – but don’t know what to do with them. They seem to be quite thick – but malleable – copper, coated in pretty tough plastic. They mostly range in length from around 50cm (20″) to about 1m (40″), but there are some shorter ones at about 20cm (8″) too.

The wires look pretty flexible and strong but I don’t know if they’re bendy enough to use for something like macrame – at least fine knotting – but I like the idea of using them from something crafty. So any suggestions?

Or any more practical ideas?

I don’t know if the battery just stopped holding charge or if something mechanical went wrong with it suddenly but either way, it’s now an ex-razor.

Any suggestions for ways I can recycle or reuse the razor itself – presumably a battery as well as the actual shaving bit – or the related charger? With the growing popularity of rechargeable batteries in electronic devices, I suspect there is a growing mountain of electrical adaptors with proprietary connectors that are no longer needed once the device has died or is replaced because it’s the wrong shade of chrome for this week’s fashion. So any ideas what to do with them?

I suspect when a piece of remote-controlled equipment dies, people just sling out the remote too but are there any way to reuse them? Let’s assuming getting the equipment fixed isn’t possible or feasible, are there any uses for the now-redundant remote control?

Or are there any places that re-sell them? We lost our tv remote control a few years ago and after searching everywhere, bought a replacement – but the replacement was brand new, when a second-hand one would have sufficed. Then, because life is just like that, we found the original and so now have a spare – is there any way for us to pass it on?