We’ve got lots of board games (Monopoly and such) from when the kids were little but they’re not in good condition so I don’t think charity shops will take them. What else can I do with them?

As long as they’ve still got all/enough pieces, games like that don’t need to be in pristine condition to be fun. Perhaps offer them honestly on your local Freecycle/Freegle group – someone might just be grateful to have them whatever the condition, especially if they’re going to be playing with similar destructive kids ;) Or someone might want them for “spares and repairs”, or to make things out of the game pieces.

What could they make? Jewellery from the pieces, notebook covers from the board, decorative decoupage with paper money/cards – quick searches on Etsy shows all sorts of things being made from old Monopoly, Risk and Cluedo game parts — and that some people are selling the raw materials too (especially if they’re vintage games). Of course, you could make those things yourself too if you’re the crafty sort :)

Any other suggestions for Harrie? What have you done with old board games?

Hello, I’m a paper crafter and was a Stampin Up demonstrator and use the Stampin Up snail adhesives or the tombow roller adhesives.

Anyhow, to refill these things you have to buy another plastic mechanism that has the tape already in it. With all the paper crafters all over the world I’m sure there are lots in landfills. Wondering how they can be recycled for the plastic.

For non-paper crafters like me, the picture is of a snail adhesive refill – as Carmel says, tape already enclosed in a hard plastic shell.

As for actually recycling it, the lovely people at Stampin Up tell me it’s a whole different set of plastics (details below) so I wouldn’t have thought many people will want to pull them apart to recycle as many bits as possible.

Sometimes I’m a bit worried about always suggesting craft projects as reuse ideas because I know not everyone is the crafty sort, but the people who buy these already are crafty or they wouldn’t be buying them so … any fab craft ideas to re-use or repurpose these babies?

Or any other suggestions?

Ever since I made that first batch, I’ve been on the look out for what I can use as moulds this time around. Last time, I had two old food trays for bar soaps, but when I ended up making a lot more soap than I’d originally intended, I grabbed whatever else I could find – some shaped fruit trays (small hand soaps), an old round ice cream tub (too wide when sliced into discs so had to cut them into semi-circles, which was a bit odd) and the square edged plastic bottles the olive oil had come in (nice size hand soaps, but it was awkward to get it out). (The latter two can be seen in the picture.)

All sorts of packaging has been subject to my “would it make nice soap?” eye. A few weeks ago, I was reading about someone else’s soap making on Simple, Green, Frugal and she mentioned using poster tubes (with the bottom sealed up) to make nice sized round soaps. As we’ve not had any posters or the like delivered recently, we haven’t got any of those but it got me thinking about similar cylinders: a litre-ish, straight-ish juice or pop bottles would probably about the right size, although it’d probably be awkward to get out like the olive oil bottle. That led me down another juice line: John has got a bit of an obsession with chocolate soya milk at the moment which comes in tetrapak containers – that would be a nice size for square bar soaps and be easier to cut out…

Anyway, long story slightly shorter, what else can I reuse or recycle to make either interesting shaped soaps or simple practical ones? If you make your own (cold-process) soap, what do you use?

Do you have any upcycled moulds that you can reuse again and again rather than destroying (like would happen with the poster tube or my juice containers)?

Or on the flipside, anything you’ve used that you’d urge other people not to use?

(A few notes for non-soap makers: the soap mix at the point of pouring is about body temperature for “cold-process” soaps so plastic melting is not usually an issue, but it is incredibly caustic at this point, and will react to metals other than stainless steel. It’s poured into the mould when it’s hit “trace”, a gloopy rather than full liquid stage, and left to set in the moulds for a few days, then popped out of the moulds to continue “curing” for a few weeks before use.)

As I mentioned yesterday when talking about damaged books, it’s easier to revamp or reuse hardback books for practical purposes because they’re that bit tougher. They can be used for everything from statement bed headboards to “floating book” shelves.

On a smaller scale, they can be turned into purses/handbags, clocks, self-supporting photo frames, notebooks, iPhone charging units – and even table legs.

@AlishaAnnn told us about the table below on Twitter yesterday: “Table legs from recycled books with a metal rod through. They are sturdy and spin. Old barn window on top.” Great recycling!

That’s not to say paperback books aren’t without their reuses – their relative flexibility is an asset for things like this card wallet:

Other people prefer to use the pages of old books: either as art in themselves or as canvas for printing/painting, to decorate greeting cards, envelopes, super retro bunting or, on more elaborately, this fantastic paper wreath.

And BellwethersDB on Twitter had a good few ideas for using the pages too: “Tear out the pages and print vintage images on them and frame them! So pretty”, “Tear the pages and mod podge them onto old ornaments, add glitter and a ribbon. Voila! A “new” ornament!” and “Paper beads! Then paint them and string them on ribbon.” @_jennifergrace_ also tweeted us to say she’d used book pages as the background for welcome cards & name badges for a hen weekend, to make her own ideas notebook and as part of a bigger art project.

And speaking of pages, this desk tidy is made with a phone book but any oversized book – old annuals or craft books – would would just as well.

Finally, Alice in Blogland sent us a link to this fab recycling books for booklovers story, such amazingly intricate work!

Have you seen any other great example of reusing, recycling or upcycling of old or damaged books? If so, let us know in the comments!

Thinking about books reminded me about an email I received a while ago (but can’t find at the moment) asking about whether water damaged books can be recycled. Even though they’re nearly entirely paper, the glue used to bind books can sometimes cause problems along the recycling chain so don’t assume they can be added to normal paper recycling bins – check with your local council/the company that collects the bin first. They can be composted though if you have a compost heap at home – tear them up and add alongside plenty of “greens” if you want them to rot down quicker. On a similar destructive vein, my friend Strowger assures me they burn very well, for a long time, in woodburning stoves, although I’m not sure I could bring myself to burn even a damaged book!

Most people I know get clear out their books by giving them to charity shops – but most charity shops, particularly large chain ones, only want them in a very good, sellable condition so they can charge a decent amount for them. People who do carboot sales or run adhoc jumble sales etc are often slightly less discerning (since they generally have less overheads so can sell them cheaper to offset the condition) – I regularly see boxes of books given away on Freecycle/Freegle labelled as “ideal for carbooters” so that might be an option if the books are still readable and you don’t fancy selling them yourself.

Hardback books – particularly ones with interesting, pretty or retro covers – can be recycled into folders for papers or notebooks (I’ll post some links to how-tos in a “upcycling books round-up” tomorrow). Other people scavenge undamaged pages from old books to use for papercrafts or artwork.

Anyone got any particular reuse, recycling or upcycling suggestions for damaged books, or their parts?

My aunt moved into a care home quite suddenly last month so we’ve “inherited” a few boxes of her stuff to deal with. One of the boxes includes about 40 cheap chintzy little figurines made from glass. I don’t feel right just throwing them away but really don’t want them. What can I do with them? Can they be recycled with glass bottles?

On the latter question, I’d have to say check with your local council but probably not – different types of glass have different properties, which is why bottle banks don’t tend to accept panes of glass or broken tumblers etc, and they probably won’t want to take a chance on this one off load.

Anyway, it would be better to pass them on or reuse them before recycling them. Give them away to a local charity shop or on Freecycle/Freegle, or sell them on eBay – you could sell them as a job lot for car booters or the like if you just want to get rid of them ASAP. They might not mean much to you but some people will collect them and you might have just the figurine they’re looking for.

Any reuse/upcycling ideas?

I always snip buttons from old clothes before using them for rags but after a few years of my three’s school shirts, I’ve got more plain white buttons than I know what to do with. If they were pretty I’d keep them for crafts but they’re boring! Any ideas?

They could be revamped/upcycled to make them a bit more exciting: I saw a tutorial for spray painting plain buttons a few weeks ago – I’m not a fan of spray paints in general but if you had some ends of cans leftover from other projects, that certainly is one option. An alternative would be to use them to make fabric covered buttons, using up tiny bits of reclaimed material.

Aside from that, they could be used as they are in lieu of beads or the like in a homemade percussion instrument (not one for small kids).

Any other ideas on how they can be reused?

I’ve always put my horse’s tail and mane clippings on the his manure heap to compost down but I recently wondered if I could use them for something else instead. I’ve heard of horse hair mattresses but don’t think I have enough for that!

According to Wikipedia, horsehair is/has been used “for various purposes, including upholstery, [artists & shaving] brushes, the bows of musical instruments, a hard-wearing fabric called haircloth, and for horsehair plaster, a wallcovering material formerly used in the construction industry and now found only in older buildings. .. [It is also used in] the crafts of horsehair hitching, horsehair braiding, pottery, and in making jewellery items such as bracelets, necklaces, earrings and [hair clips].” I think the latter group is more appropriate to reuses at home – but the former group might provide inspiration on where you could pass it on — for example, if you had a stables and generated a lot of horsehair, a local old-fashioned upholsterer might be interested in it.

You can compost it of course (as Bea has been doing) and some people use it (along with human hair clippings and anything similarly bit-ty) to discourage slugs from delicate.

Any other ideas?

My hubby and I have been homebrewing for a couple of years but our last batch was not nice at all! We’ve got 40 bottles of it but don’t want to drink it ourselves and don’t think it would be fair to force it on others either! Is there anything to be done with it other than pouring it away?

Since I’m obsessed with gardening these days, the first idea that springs to mind is slug traps – they’re not fussy about the quality or taste of the beer. (We’ve not had to use slug traps this year because it’s been too hot and dry for the critters but I’ve used some five years out of date four-for-80p lager for my beer traps in the past and they’ve dived in as if it’s the finest ale of the gods.)

Other ideas may depend on why it’s “not nice at all”. If it’s a problem with the mouthfeel or strength of flavour, you might be able to reuse it for making something like beer bread or in pies/stews.

And if there is a possibility it’s just a matter of taste, perhaps you should try it on some less discerning friends — or if it’s really vile, use it to teach kids not to drink (“this is what all beer tastes like, you should stick to lemonade” “yes mum, it’s horrible” – perhaps an unwise idea from the “smoke a whole box of cigars” school of parenting ;) )

Anyone else got any other ideas?

Thought of another recycle that I could use some help with!

I’ve taken some waterproof trousers, jackets and cycling gear from someone who didn’t want to just dump them in landfill. I thought there would be
loads of things I could make with them – my ideas so far are a pair of rainlegs, a pair of gaiters made from the bottom of some waterproof trousers, a rucksack cover like this, a waterproof bike saddle cover and maybe a waterproof hat.

Can anyone come up with any more ideas? And does anyone know how I can seal the seams for things which need to be really watertight?

I think we’ve talked about the watertight seam question before – but if anyone has any new suggestions, please do feel free to add them.

As for things to make out of them, if I still used my bike, I’d probably want a waterproof hat/helmet cover – with a peak at the front to protect my glasses a bit. I also like the idea of gaiters as my trousers always puddle-soak.

As it is though, I rarely have to leave the house in the rain so if the waterproofs were made from a neoprene type material, I’d probably use some of it, along with a bit of expanded polystyrene foam, to make a bath pillow – much more my speed now ;)

Other ideas?

When I’m making jams & preserves, I use the hot soapy water then time in the oven approach for “sterilising” my glass jars – but that doesn’t work for John’s homebrew stuff. Some of it is plastic, some of it is just too big for the oven, and some of it is both plastic and too big. Instead, he uses sterilising solution – either bought as a concentrated liquid or made up from tablets. The stuff John uses is 2% sodium hypochlorite – weak bleach – so maybe this isn’t off on such a tangent after all ;)

Anyway, when he’s doing some homebrew, John mixes up a big vat of the sterilising fluid and uses it to sterilise this things – but since they’re hot-water-clean already, the liquid doesn’t get too messed up. I’d imagine people sterilising babies bottles would be in a similar position. It apparently has an effective life of about 24 hours so we can reuse it for other things – but what?

According to this forum on MoneySavingExpert, it’s a good halfway house for bleach – you can use it as a safer bleach for cleaning places you wouldn’t want to use full strength bleach (the microwave, tea cups, camping water bottles).

Does anyone have any other suggestions for things to do with it? I know some people use a weak bleach solution for cleaning plant pots before sowing seeds/delicate seedlings in them – would this be suitable for that?

In addition to the eight fruit trees John planted a couple of weeks ago, I planted out eight fruit bushes at the weekend and I started my first batch of cauliflower, greenhouse tomatoes and lettuce the weekend before last. Following a recommendation from The Cottage Smallholder, I’ve bought a heated propagator to give my other greenhouse crops – cucumbers, chillis, pepper & tomatoes – a warm start in life — I’m hoping that arrives in the post today so I can get started with them ASAP.

For the first few sowings, I can remember what is where — the lettuce are in the troughs & square pots, the tomatoes in the round ones, the caulis in the fibre ones – but in a few weeks, I won’t be able to remember where everything is. And outside, we’ll want to know next year (and the year after, and the year after that) which fruit trees & bushes are which variety.

In the past, I’ve used slices of drinks cans or plastic milk bottles as plant markers – and they work reasonably well if you remember to write on them using a permanent marker (which I didn’t do last year – lots of confusion mid-year). I also know other people who use ice lolly sticks (but there has been an unacceptable dearth of those consumed here in the last year) and the like. And some people buy white sticks to use as labels – buy? buy?! not I! ;)

Do you reuse or recycle any packaging or bits of “waste” to label your plants or seedlings? Do you have any suggestions for making long term labels – ones that’ll be weather-resistant for at least a few years?

(Photo by normanack)

From my sister in law I inherited a lot of yarn, mostly small balls of the same. I know you covered the item about the short ends of yarn and what to do with it. My question is a bit related.

A lot of the yarn is white or off-white. Not a colour I would choose for knitting a sweater for myself. And also for my kids, white is not a very
handy choice. Moreover, most of the yarn is synthetic, which I don’t really like to wear and makes it difficult to paint in a different colour.
So, my question is: What can I do with that white yarn? It is a box full of yarn (20 by 30 by 20 cm).

It’s not the right season to be thinking about it but my first thought was snowflake Christmas decorations (Mary Horesh recommended this crochet pattern on Twitter when she made them in December) – but if you used all of the yarn to make snowflakes, it would be more like a 10ft deep blizzard rather than a pretty delicate sprinkling of decorative snow ;)

Looking forward rather than back, I don’t wear white or choose to wear synthetics either but a lot of people do – and spring & summer are the months when a little white shrug or cardigan might be useful – perhaps keep some and pass the rest on to someone else via Freecycle/Freegle or Ravelry’s destash area.

Any other suggestions of patterns of things to make with it (ideally not clothes)? Or places to pass it on?

(Photo by missa88)

I’m a knitter but I can’t throw away the ends of yarn, not matter how small! I’ve got a carrier bag full of ball ends, some a couple of yards long, most less than a foot. Any ideas?

The longer pieces could be used for the inner rings of granny squares if you crochet too or mini-crafts both knitted or crocheted – if you’re on Ravelry, on the advanced search you can specify projects by yardage — I just did a search for projects using 5yards or less, and got over 400 results (including, I kid you not, a penis shaped chapstick holder!). The shorter pieces could be used for the odd few stitches of decoration such as eyes & noses on soft toys or tapestry/embroidery work. If you had lots and lots of shorter pieces, they could be used as stuffing for small toys.

Away from sewing & crafts, I used pretty yarn instead of string for tying up parcels etc and for clothes repair/enhancement – a little colour-clash darning, sewing on chunky buttons or used for adding hanging loops onto scarves/light jackets that come without them.

Any other suggestions? If you knit/crochet, what do you do with your scraps?

I’ve got TONS of old alto saxophone reeds lying around, and was wondering if anybody had an idea about how to reuse/recycle them?

I am incredibly unmusical but Wikipedia tells me reeds tend to be make from cane, although there are an increasing amount of synthetic ones in use.

The first idea that springs to mind is turning them into some sort of jewellery – a subtle nod to your musical skills. It might be possible to make them into a statement necklace or chunky bracelet – possibly a bit like this necklace or if you had a lot, this bracelet (they’re made out of shell but I was thinking about the shape more than anything). Or if you’ve just got a couple, dangling earrings?

Any other ideas on how they can be recycled?

I often see huge bins of clothes patterns at thrift stores. Most helplessly outdated or missing instructions. I have used them in the past as packing material but was wondering if there was any other uses. Seems like there has to be some use for the tissue type paper.

I’ve only just started making stuff from patterns but I’ve already built up a little stack of dressmakers’ tracing paper squares from the excess bits of paper from around the edges of the pattern. If I was more artistic/less clumsy, I’d imagine that I could make an interesting (low-power) lampshade by layering them around a frame or even a privacy shade panel for a window – but since I’m not, I’ll keep them in an envelope pocket in my sketch book for when I need to trace.

Lots of people seem to use them for decorative decoupage projects – for example, decorating little boxes, gift tags or furniture (I can’t find the pictures now but I’m sure I’ve seen a sewing table covered in an old pattern). Just remember to use some sort of sealer so they don’t get wet and/or tear.

They also be used for just about any tissue paper craft – the only “problem” being the somewhat muted colour compared to most bright tissue paper. That doesn’t mean they can’t look great though – pale flowers can still look fantastic whether as a bouquet or as mini fairy lightshades.

More practically, I do like Carol’s idea of using them as a packing material and they could also be used as delicate gift wrapping paper for handmade projects.

Any other suggestions?

What can I do with old pencil stubs, the used ones that are too small to write with any more?

Stubs of old crayons are super easy to reuse – just melt a load down into a new, easy-to-hold shape and off you go – but I suspect pencils will be harder.

I vaguely remember being a kid and taping two together, end to end, to make a slightly longer, double-ended pencil – and it seems you can buy gizmos to help you do that now (although I’m pretty sure I just used tape).

I also know that Jane Eldershaw of JunkJewelry uses the ends of pencils in her work.

Any other reusing or recycling ideas?

Is there any use for old sparkplugs?

As someone who barely knows what a sparkplug looks like let alone does, I’m not really in a position to answer this question. Google tells me that they can be cleaned up again but it’s not recommended (although disclaimer: all the people talking about it are performance/engine obsessives, so they might be pushing for more than the average person).

Does anyone else know if they can be revamp and reused?

Or what about other reuses for them? Anyone incorporated them into any other creations?

And what about recycling? Can they be recycled for their component parts and if so, where/how?

(Photo by Gerald Zuckier)

I’ve been making super-easy cheeses like paneer for a few years now but before I committed to anything that needed months of effort/ageing, I wanted to learn some core skills from someone who knows what they’re doing. The course, through the Low Impact Living Initiative, was great for that and very very interesting – so now I have a burning desire to make all sorts of cheeses – and that requires moulds.

We saw a selection of stainless steel moulds and (food-grade) plastic ones – and someone else on the course mentioned they’d heard about moulds made from drainpipes. The course leader didn’t exactly advocate that but said that in theory, it would be fine — just drill holes in the rigid sides, making sure the outside of the hole was wider than the inside, and that there was no jagged bits of plastic left on the inside or outside of the holes.

So that got me thinking: what else could cheese moulds be made from? Any food-grade plastic packaging perfect for reusing? Or do any other household/kitchen utensils lend themselves to being used as cheese moulds – either as they are or with a bit of modification? Because it’s just for my consumption, I’m not bothered about them being pretty round cheeses.

If you make your own cheese, what do you use?

After our discussion about making one earlier in the year, I have a trug-ish basket for gentle, slow foraging but I like the idea of a dedicated small fruit/berry harvesting bag – something that either hangs from my shoulder (possibly across my body for extra stability) to leave both hands free for collecting.

I could just use a long handled shopping bag but after seeing a post about purpose-bought harvesting bags at The Cottage Smallholder, I wondered about making one with a bit more structure than my floppy shoppers – I imagine it would protect the berries/fruit from accidentally squishing and hold the bag open so it’s easy to drop fruit in it with both hands full. (The more structured bag could be used as a general shopping bag too during the rest of the year so it’s not just a one-off use.)

So any suggestions/ideas/thoughts on how to make one?

The shape of the Cottage Smallholder’s one reminds me of a small pop-up laundry basket – a reuse for a (clean) old one of those maybe?

After posting my The Really Good Life post about fishing for fruit with a child’s fishing net, I read about someone making a similar net with an old wire coathanger and the gusset of some old tights — I wonder if another gusset could be used to make a basket – the fabric would be light, quick-drying and smooth on the fruit.

Another idea might be to crochet it – crocheting “net” shopping bags is easy-peasy but I’d have to make sure the holes didn’t stretch so much that the fruit would escape. I’d also have to add the structure to it – any suggestions for doing that? An old record might make a fun base plate but what about something to hold it open at the top?

I thought it would be worth asking about squash (above) and marrow/courgette/zucchini (below) leaves because our garden is full of them and some of them are massive – when they stop finally fruiting, that’s going to be a LOT of vegetable matter going in the compost bin. Obviously not the end of the world – they’ll make nice compost for next year and it’ll nicely balance out our browns in there – but still.

From what I’ve read, chickens aren’t so keen to eat them so they’re probably not good for them. What about other livestock? If it’s veggie livestock, the leaves will end up in the compost anyway, just serving another purpose first ;)

My next question was going to be “can we eat them?” but a bit of Googling has already answered that for me – yes, we can eat squash leaves but best stick to the tender new leaves & shoots of summer squash, else they’re a bit tough. They also need peeling too apparently. Anyone had any experience of cooking with them?

Any other reuses for them?

I just know they’ve got pieces missing so would feel bad about giving them to a charity shop. They’re cardboard with a shiny paper top so they could be recycled?

Probably – as long as it’s just paper and not plastic laminate. Most (but not all) paper recycling bins take light card & glossy paper but best to check the advice in your area.

Since it’s getting to the dog days of the summer holidays and they’ll be bored, perhaps use child labour to do the jigsaws and check for missing pieces, then you’ll know what’s missing. If it’s not an important piece, you could mark on the box what is missing and some charity shops/thrift shops still might take them.

Other than that, I’ve seen old puzzle pieces used as decorations in a number of craft projects – photo frames & on ornaments and to make Christmas decorations (wreaths & baubles).

Any other suggestions?

(Photo by pzado)

Due to a combination of a underestimation of seed germination rates, disorganisation/ignoring plans and demon slugs, my growing hasn’t gone quite as I thought it might but we’re doing ok and I’ve learned a lot about growing here.

One thing definitely on my list for next year – well, technically later this year – is to give my beds a good old fashioned manure boost in late autumn. The soil here is very poor but since I reclaimed the beds from the weeds in early spring, I couldn’t do a manure feed this year and I think our output has suffered as a result. I’ve been feeding the seedlings/growing plants since then but I think better soil to start with would have helped overall. Ah well, live and learn.

Anyway, homemade plant/vegetable fertilisers. I’m sure everyone reading this has a bulging compost heap for general compost goodness (if not, start one today!) but I thought it might be interesting to hear what kitchen scraps/plants/garden waste/household waste people use for specific fertilising/feeding plants at this time of year.

I’ve been making/using a lot of liquid fertiliser from nettles this year because we have so many in the field next door to our house. Coffee grinds are also popular as a mid-season fertiliser, as are potash and bonemeal.

What are your favourite produced-at-home fertilizers? Do you have any tips for particular plants?

As I’ve just started spinning wool/yarn, the idea of a full fleece was appealing but also somewhat overwhelming – we said we’d take them if he’d been lumbered with them but otherwise it would be probably best to pass them onto someone else. Aside from spinning, we couldn’t really think of anything to do with them – then he suggested I ask on here for other uses.

We’ve covered man-made fleece jackets on here before but not the from-a-sheep variety. Apparently some people wash them and use them for insulation but there is a problem with moth-attacks.

What else can be done with them?

I’m having lots of fun growing stuff in our new garden. The old garden was considerably small and got no (no!) direct sunlight whatsoever, which made growing things a little difficult. Here we get a lot more sun – in different spots throughout the day – and that’s actually been a bit of a problem this summer – my current nursery area (the porch) has been getting a bit too hot for some types of seedlings. Next year, I’d like more nursery space generally too so I thought a cold frame would make sense.

Cold frames are one of those great DIY projects with more people probably building their own out of scrap than buying them new. But I’ve got a bit of builders’ block – unable to think what to use. I’ve got my eye out for old windows or the like, and I nearly yoinked my best friend’s old shower cubicle but it was way too big and would have been problematic to cut down – but aside from that, I can’t think what else I might use for the clear parts. Any suggestions?

As for the frame, my dad built his latest coldframe using the frame of my old childhood bed (a divan, so a ready-made frame), which made me start thinking about other ready-made frames to make it easier for my weak woodworking skillz: we’ve got an old table that could be flipped upside down to provide a solid base and uprights – attaching stuff to them would probably be a lot easier than starting from scratch.

Another idea might be to build a brick frame – we’ve got some salvaged bricks around the places – but I wouldn’t know how to hinge a lid to that. Hinging a lid isn’t vital, just useful though…

Any other suggestions? Any pros/cons to brick or wood frames? What have you done?

We’ve only seen a few things in 3D – at the IMAX in Bradford – and we’ve always left the glasses there afterwards. But if we had taken them home (and if there wasn’t anywhere obvious for recycling, that’s what we’d have done), how could we have reused them?

The ones we’ve worn have been stylistic wonders – quirky-shaped plastic frames, which look particularly great over my normal specs…

• Craftzine linked to Christopher Paul’s painted plates – giving chintzy old plates a new lease of life (presumably just as artwork but still). A very fun idea!
• The Greenists ran a tutorial by Mudnessa on turning wide leg jeans into skinny ones – perfect if you fancy a change.
• Alison pointed us in the direction of this news story about the Deepwater Horizon oil spill – how hairdressers and transvestites are recycling stuff together to help soak up the oil
• Leo sent us an email to alert us to the RSPB’s second-hand binocular collection scheme – if you’ve got any old binoculars, telescopes or tripods lying around your house, you can donate them to the RSPB and they’ll use them in a conservation or educational project.
• And Joris sent us an email about Gumdropbins – fun bins to collect chewing gum – which are made from old chewing gum.
• It should be a bit late in the year for this type of thing but since the heating’s off & I’m thinking summery thoughts, the nights can still get pretty chilly – and that’s when hot water bottles with super snuggy recycled covers are just perfect.
• Finally, Alex from Just Cook It has been blogging about cooking with nettles recently – and the recipes sound fantastic. A great way to “reuse” those weeds from the garden!

How can you recycle old, unused, unwanted incense sticks?

I was cleaning and found an old box of them. I hear you can still burn them, but I’m not into smelly stuff any more and I hear certain kinds may have toxic ingredients (which is why I don’t want to try composting them).

Short of giving them to someone else, do you have any ideas?

I think a lot of people will be in the same position as Jill – nearly full boxes of them tucked at the back of cupboards after they’ve decided they don’t like the smell or don’t want to use them any more.

I’m pretty sure I’ve seen some good reuses for them in the past but searching now, I can only find suggestions for things to reuse as incense stick holders – so I’m going to have to defer to the wonderful Recycle This community — any ideas?

(Photo by LittleMan)

I thought it might be nice to have some herbs in hanging baskets and/or (semi-circular) wall planters too – but then saw the price of the wall planters — cor lumme, kerching! kerching! There are some cheaper rattan ones (which fall apart after a couple of years) and some formed plastic ones (ugh) but aside from those, decent sized ones are bordering on cost-prohibitive when buying more than one or two. (Am I looking in the wrong places? I’ve looked everywhere from cheap hardware chain to garden centres – wire frame hanging baskets are pretty cheap but I can’t find the comparative ones for wall planters, even though I’m sure I’ve seen them in the past.)

Anyway, I’m on the look out for people getting rid of old ones locally but as usual, I wondered how I could go about making some of my own out of scrap wire, wood, metal or other “waste” items (or adapt existing tubs/containers, such as plastic food buckets or clay/terracotta plant pots).

Anyone given it a go in previous years? Any hints/tips? Would it be easier to make plant pot holders/shelves than wall planters? Any ideas or suggestions would be great!

I teach art in Glasgow and I’m trying to find some way of punching disc of various diameters (eg.10mm 15mm 22mm 30mm) out of recycled plastic, fabric, paper etc. to make jewellery. Any suggestions?

The ring-binder size metal ones, like one in the picture, work fine for small circles, but only small discs about 5mm in diameter. I tried using fancier shaped/bigger hole punches with thin plastic but because the ones I had were designed for thick paper/card, the plastic kept gumming them up. Alison Bailey Smith has more luck than me with that sort of thing though and recommends a particular brand of hole punch – X Cut.

Are there any alternatives to using punches? What are the options for bigger circles? Anything quicker/more accurate than just cutting them out with scissors?

Punching holes in fabric other than felt (and the like) may cause a fraying problem, which might ruin/reduce the lifespan of the garment. Any ways around that or other advice?