i cut the top off cheap cans of beer (shops own value brands) with a can operner and sink them in the garden as slug traps.

if the edge is sharp i put some gaffer tape over it, i’m not so bothered about the slugs hurting themselves on it but don’t wantg to deal with little cut fingers when my son goes “slug fishing” (he’s so delightful)

I always decant my beer into other containers for making traps but I guess I could use an old can for one trap and the beer can itself for the another trap… Thanks Ali!

I discovered this weekend that you can actually weave two cans together to make one, um, slightly wonky can.

We’re going to use it as a plant pot

: )

-louisa

hammer them flat and then make a hole with a nail in each end. After that you can link them together with wire and make a big piece of art out of cans. I have one in my yard, it looks great and makes beautiful colours when hit by the sun, though it eventually gets bleached from the weather.

You can make art of it, which is quite forgotten now.
Cut bottom and a top, then flatten the left-over bit. Draw a picture on the labeled side, put it on some soft-ish surface (like soft wood) then use a blunt nail to press the image out. You can also use a hammer slightly. When you done - turn it on the clear side - you will see a nice image you can frame, or use as a ready picture (just bend the sides to the other side, so they are not sharp anymore, and insert a piece of carton so that the labels will not be visible. I don’t know the name of this art in english unfortunatelly. It’s called “chekanka” in russian, if you enter it into Google images - you may see some pictures, but here is a few that I found: http://www.himbat.ru/gallery/displayimage.php?album=lastup&cat=17&pos=17
http://www.photostock.am/selected_image.php?id=1191
http://www.telemed.org.ua/TK/Mfs/informacia%20o%20klinike.html

re-previous post of mine - the art called metal embossing. If you enter this into google images- you will see loads of design examples. It’s a very good decorating technique, you can use it to give new life to old furniture, lampshades etc. Just cut off the top and bottom, then flatten it, draw a picture on the other side, then hammer it out slightly with a blunt nail.

Are you a crafter? Got a Sizzix machine?

Then here you go:

http://www.pccrafts.com/content/view/64/43/

I got a sizzix machine specifically for this type of project taught by someone else… I made like 2 pins.. hahahhahaa But I own a ton of dies! hahaha!

I use my sizzix machine on mine too, but I stick the foam before I cut. I use coke cans for christmas decorations.

Squares can be cut from the cans, holes punched in the edges and then crocheted together to make bags.

[…] covered the cans themselves back in the day - over two years ago, gosh! that’s an eon in internet […]